How To Set Up A Metered Connection For Your Wireless Network


In Microsoft Windows 10, all Internet Service Providers charge you in light of the amount of information you have to make use of as part of an exclusive period.
Every one of these federations depends on the Fair Usage Policy where you get a settled scale of information to use free of cost and once you exceed your portion of information use you are charged additionally, or your association speed will be diminished until the next billing cycle arrives.
A metered association will help you in decreasing your transfer speed utilization by keeping it under as far as possible.
Step 1
First, you can left click on the Start icon and click Settings icon.
Step 2
In this step, when you’ll click on the settings icon, a new dialogue box will open; then you can select network & internet options, as shown in below picture.
Step 3
In this step, when you select network & internet option, a new dialogue box will open, then you can select from the alternatives on the left-hand side, tap on Wi-Fi, as shown in below picture.
Step 4
In this step, when you select Wi-Fi option then you can select Advanced options link, as shown in below picture.
Step 5
In this step, when you can select advanced options then you can set metered connection, turn the switch On/Off. As shown in below picture.


I hope you enjoyed this article. Follow C# Corner to learn more new and amazing things about Windows 10.
Thanks for reading this article.