Writing Your Own GPS Applications: Part I

"I am continually amazed by how little code is required to use atomic clocks in satellites 11,000 miles above my head."

Introduction

What is it that GPS applications need to be good enough to use in a commercial environment, such as in-car navigation? Also, how does the process of interpreting GPS data actually work? In this three-part series, I will cover both topics and give you the skills you need to write a commercial-grade GPS application that works with a majority of GPS devices in the industry today.

One Powerful Sentence

This first part in the series will explore the task of interpreting raw GPS data. Fortunately, the task is simplified thanks to the National Marine Electronics Association which introduced a standard for the industry, now in use by a vast majority of GPS devices. To give developers a head start, I chose to use some Visual Studio .NET source code from my "GPS.NET Global Positioning SDK" component. (The code is stripped of features like multithreading and error handling for brevity.)

NMEA data is sent as comma-delimited "sentences" which contain information based on the first word of the sentence. There are over fifty kinds of sentences, yet an interpreter really only needs to handle a few to get the job done. The most common NMEA sentence of all is the "Recommended Minimum" sentence, which begins with "$GPRMC". Here is an example:

$GPRMC,040302.663,A,3939.7,N,10506.6,W,0.27,358.86,200804,,*1A

This one sentence contains nearly everything a GPS application needs: latitude, longitude, speed, bearing, satellite-derived time, fix status and magnetic variation.

The Core of An Interpreter

The first step in making an NMEA interpreter is writing a method which does two things: separating each sentence into its individual words and examining the first word to figure out what information is available to extract. Listing 1-1 shows the start of the interpreter class.

(Listing 1-1: The core of an NMEA interpreter is a function which divides NMEA sentences into individual words.)

'*******************************************************

'** Listing 1-1. The core of an NMEA interpreter

'*******************************************************

Public Class NmeaInterpreter

' Processes information from the GPS receiver

Public Function Parse(ByVal sentence As String) As Boolean

' Divide the sentence into words

Dim Words() As String = GetWords(sentence)

' Look at the first word to decide where to go next

Select Case Words(0)

Case "$GPRMC" ' A "Recommended Minimum" sentence was found!

' Indicate that the sentence was recognized

Return True

Case Else

' Indicate that the sentence was not recognized

Return False

End Select

End Function

' Divides a sentence into individual words

Public Function GetWords(ByVal sentence As String) As String()

Return sentence.Split(","c)

End Function

End Class

The next step is to perform actual extraction of information, starting with latitude and longitude. Latitude and longitude are stored in the form "DDD°MM'SS.S", where D represents hours (also called "degrees"), M represents minutes, and S represents seconds. Coordinates can be displayed in shorthand, such as "DD°MM.M'" or even "DD°". The fourth word in the sentence, "3939.7", shows the current latitude as hours and minutes (39°39.7'), except the numbers are squished together. The first two characters (39) represent hours and the remainder of the word (39.7) represents minutes. Longitude is structured the same way, except that the first three characters represent hours (105°06.6'). Words five and seven indicate the "hemisphere", where "N" means "North", "W" means "West" etc. The hemisphere is appended to the end of the numeric portion to make a complete measurement. I've found that NMEA interpreters are much easier to work with as they are event-driven. This is because data arrives in no particular order. An event-driven class gives the interpreter the most flexibility and responsiveness to an application. So, I'll design the interpreter to report information using events. The first event, PositionReceived, will be raised whenever the current latitude and longitude are received. Listing 1-2 expands the interpreter to report the current position.

(Listing 1-2: The interpreter can now report the current latitude and longitude.)

*******************************************************

'** Listing 1-2. Extracting information from a sentence

'*******************************************************

Public Class NmeaInterpreter

' Raised when the current location has changed

Public Event PositionReceived(ByVal latitude As String, _

ByVal longitude As String)

' Processes information from the GPS receiver

Public Function Parse(ByVal sentence As String) As Boolean

' Look at the first word to decide where to go next

Select Case GetWords(sentence)(0)

Case "$GPRMC" ' A "Recommended Minimum" sentence was found!

Return ParseGPRMC(sentence)

Case Else

' Indicate that the sentence was not recognized

Return False

End Select

End Function

' Divides a sentence into individual words

Public Function GetWords(ByVal sentence As String) As String()

Return sentence.Split(","c)

End Function

' Interprets a $GPRMC message

Public Function ParseGPRMC(ByVal sentence As String) As Boolean

' Divide the sentence into words

Dim Words() As String = GetWords(sentence)

' Do we have enough values to describe our location?

If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _

Words(6) <> "" Then

' Yes. Extract latitude and longitude

Dim Latitude As String = Words(3).Substring(0, 2) & "°" ' Append hours

Latitude = Latitude & Words(3).Substring(2) & """" ' Append minutes

Latitude = Latitude & Words(4) ' Append the hemisphere

Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours

Longitude = Longitude & Words(5).Substring(3) & """" ' Append minutes

Longitude = Longitude & Words(6) ' Append the hemisphere

' Notify the calling application of the change

RaiseEvent PositionReceived(Latitude, Longitude)

End If

' Indicate that the sentence was recognized

Return True

End Function

End Class

One thing to watch out for here is that some GPS devices will report blank values when no information is known. Therefore, it's a good idea to test each word for a value before parsing. If you need to type the degree symbol (°), hold down the Alt key and type "0176" on the numeric keypad.

Taking Out the Garbage

A checksum is calculated as the XOR of bytes between (but not including) the dollar sign and asterisk. This checksum is then compared with the checksum from the sentence. If the checksums do not match, the sentence is typically discarded. This is okay to do because the GPS devices tend to repeat the same information every few seconds. With the ability to compare checksums, the interpreter is able to throw out any sentence with an invalid checksum. Listing 1-3 expands the interpreter to do this.

(Listing 1-3: The interpreter can now detect errors and parse only error-free NMEA data.)

'*******************************************************
'**  Listing 1-3.  Detecting and handling NMEA errors
'*******************************************************

Public Class NmeaInterpreter
  ' Raised when the current location has changed
  Public Event PositionReceived(ByVal latitude As String, _
                                ByVal longitude As String)
  ' Processes information from the GPS receiver
  Public Function Parse(ByVal sentence As String) As Boolean
    ' Discard the sentence if its checksum does not match our calculated
    'checksum
    If Not IsValid(sentence) Then Return False
    ' Look at the first word to decide where to go next
    Select Case GetWords(sentence)(0)
      Case "$GPRMC"      ' A "Recommended Minimum" sentence was found!
        Return ParseGPRMC(sentence)
      Case Else
        ' Indicate that the sentence was not recognized
        Return False
    End Select
  End Function
  ' Divides a sentence into individual words
  Public Function GetWords(ByVal sentence As String) As String()
    Return sentence.Split(","c)
End Function
  ' Interprets a $GPRMC message
  Public Function ParseGPRMC(ByVal sentence As String) As Boolean
    ' Divide the sentence into words
    Dim Words() As String = GetWords(sentence)
    ' Do we have enough values to describe our location?
    If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _
                                Words(6) <> "" Then
      ' Yes. Extract latitude and longitude
      Dim Latitude As String = Words(3).Substring(0, 2) & "°" ' Append hours
      Latitude = Latitude & Words(3).Substring(2) & """"      ' Append minutes
      Latitude = Latitude & Words(4)     ' Append the hemisphere
      Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours
      Longitude = Longitude & Words(5).Substring(3) & """"     ' Append minutes
      Longitude = Longitude & Words(6)     ' Append the hemisphere
      ' Notify the calling application of the change
      RaiseEvent PositionReceived(Latitude, Longitude)
    End If
    ' Indicate that the sentence was recognized
    Return True
  End Function
  ' Returns True if a sentence's checksum matches the calculated checksum
  Public Function IsValid(ByVal sentence As String) As Boolean
    ' Compare the characters after the asterisk to the calculation
    Return sentence.Substring(sentence.IndexOf("*") + 1) = GetChecksum(sentence)
  End Function
  ' Calculates the checksum for a sentence
  Public Function GetChecksum(ByVal sentence As String) As String
    ' Loop through all chars to get a checksum
    Dim Character As Char
    Dim Checksum As Integer
    For Each Character In sentence
      Select Case Character
        Case "$"c
          ' Ignore the dollar sign
        Case "*"c
          ' Stop processing before the asterisk
          Exit For
        Case Else
          ' Is this the first value for the checksum?
          If Checksum = 0 Then
            ' Yes. Set the checksum to the value
            Checksum = Convert.ToByte(Character)
          Else
            ' No. XOR the checksum with this character's value
            Checksum = Checksum Xor Convert.ToByte(Character)
          End If
      End Select
    Next
    ' Return the checksum formatted as a two-character hexadecimal
    Return Checksum.ToString("X2")
  End Function
End Class

Wireless Atomic Time

Time is the cornerstone of GPS technology because distances are measured at the speed of light. Each GPS satellite contains four atomic clocks which it uses to time its radio transmissions within a few nanoseconds. One fascinating feature is that with just a few lines of code, these atomic clocks can be used to synchronize a computer's clock with millisecond accuracy. The second word of the $GPRMC sentence, "040302.663", contains satellite-derived time in a compressed format. The first two characters represent hours, the next two represent minutes, the next two represent seconds, and everything after the decimal place is milliseconds. So, the time is 4:03:02.663 AM. However, satellites report time in universal time (GMT+0), so the time must be adjusted to the local time zone. Listing 1-4 adds support for satellite-derived time and uses the DateTime.ToLocalTime method to convert satellite time to the local time zone.

(Listing 1-4: This class can now use atomic clocks to synchronize your computer's clock wirelessly.)

'********************************************************

'**  Listing 1-4.  Add support for satellite-derived time

'********************************************************

Public Class NmeaInterpreter
  ' Raised when the current location has changed
  Public Event PositionReceived(ByVal latitude As String, _
                                ByVal longitude As String)
  Public Event DateTimeChanged(ByVal dateTime As DateTime)
  ' Processes information from the GPS receiver
  Public Function Parse(ByVal sentence As String) As Boolean
    ' Discard the sentence if its checksum does not match our
    ' calculated checksum
    If Not IsValid(sentence) Then Return False
    ' Look at the first word to decide where to go next
    Select Case GetWords(sentence)(0)
      Case "$GPRMC"      ' A "Recommended Minimum" sentence was found!
        Return ParseGPRMC(sentence)
      Case Else
        ' Indicate that the sentence was not recognized
        Return False
    End Select
  End Function

  ' Divides a sentence into individual words
  Public Function GetWords(ByVal sentence As String) As String()
    Return sentence.Split(","c)
  End Function
  ' Interprets a $GPRMC message
  Public Function ParseGPRMC(ByVal sentence As String) As Boolean
    ' Divide the sentence into words
    Dim Words() As String = GetWords(sentence)
    ' Do we have enough values to describe our location?
    If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _
                                Words(6) <> "" Then
      ' Yes. Extract latitude and longitude
      Dim Latitude As String = Words(3).Substring(0, 2) & "°" ' Append hours
      Latitude = Latitude & Words(3).Substring(2) & """"    ' Append minutes
      Latitude = Latitude & Words(4)     ' Append the hemisphere
      Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours
      Longitude = Longitude & Words(5).Substring(3) & """"    ' Append minutes
      Longitude = Longitude & Words(6)     ' Append the hemisphere
      ' Notify the calling application of the change
      RaiseEvent PositionReceived(Latitude, Longitude)
    End If
    ' Do we have enough values to parse satellite-derived time?
    If Words(1) <> "" Then
      ' Yes. Extract hours, minutes, seconds and milliseconds
      Dim UtcHours As Integer = CType(Words(1).Substring(0, 2), Integer)
      Dim UtcMinutes As Integer = CType(Words(1).Substring(2, 2), Integer)
      Dim UtcSeconds As Integer = CType(Words(1).Substring(4, 2), Integer)
      Dim UtcMilliseconds As Integer
      ' Extract milliseconds if it is available
      If Words(1).Length > 7 Then
          UtcMilliseconds = CType(Single.Parse(Words(1).Substring(6), _
              CultureInfo.InvariantCulture) * 1000, Integer)
      End If
      ' Now build a DateTime object with all values
      Dim Today As DateTime = System.DateTime.Now.ToUniversalTime
      Dim SatelliteTime As New System.DateTime(Today.Year, Today.Month, _
        Today.Day, UtcHours, UtcMinutes, UtcSeconds, UtcMilliseconds)
      ' Notify of the new time, adjusted to the local time zone
      RaiseEvent DateTimeChanged(SatelliteTime.ToLocalTime)
    End If
    ' Indicate that the sentence was recognized
    Return True
  End Function
  ' Returns True if a sentence's checksum matches the calculated checksum
  Public Function IsValid(ByVal sentence As String) As Boolean
    ' Compare the characters after the asterisk to the calculation
    Return sentence.Substring(sentence.IndexOf("*") + 1) = _
                                       GetChecksum(sentence)
  End Function
  ' Calculates the checksum for a sentence
  Public Function GetChecksum(ByVal sentence As String) As String
    ' Loop through all chars to get a checksum
    Dim Character As Char
    Dim Checksum As Integer
    For Each Character In sentence
      Select Case Character
        Case "$"c
          ' Ignore the dollar sign
        Case "*"c
          ' Stop processing before the asterisk
          Exit For
        Case Else
          ' Is this the first value for the checksum?
          If Checksum = 0 Then
            ' Yes. Set the checksum to the value
            Checksum = Convert.ToByte(Character)
          Else
            ' No. XOR the checksum with this character's value
            Checksum = Checksum Xor Convert.ToByte(Character)
          End If
      End Select
    Next
    ' Return the checksum formatted as a two-character hexadecimal
    Return Checksum.ToString("X2")
  End Function
End Class

Direction & Speed Alerts

GPS devices analyze your position over time to calculate speed and bearing. The $GPRMC sentence at the beginning of this article also includes these readings. Speed is always reported in knots, and bearing is reported as an "azimuth", a measurement around the horizon measured clockwise from 0° to 360° where 0° represents north, 90° means east, and so on. A little math is applied to convert knots into miles per hour. The power of GPS is again demonstrated with one line of code in listing 1-5 which figures out if a car is over the speed limit.

(Listing 1-5: This class can now tell you which direction you're going and help prevent a speeding ticket.)

'*******************************************************

'** Listing 1-5. Extracting speed and bearing

'*******************************************************

Public Class NmeaInterpreter

' Raised when the current location has changed

Public Event PositionReceived(ByVal latitude As String, _

ByVal longitude As String)

Public Event DateTimeChanged(ByVal dateTime As DateTime)

Public Event BearingReceived(ByVal bearing As Double)

Public Event SpeedReceived(ByVal speed As Double)

Public Event SpeedLimitReached()

' Processes information from the GPS receiver

Public Function Parse(ByVal sentence As String) As Boolean

' Discard the sentence if its checksum does not match our calculated

' checksum

If Not IsValid(sentence) Then Return False

' Look at the first word to decide where to go next

Select Case GetWords(sentence)(0)

Case "$GPRMC" ' A "Recommended Minimum" sentence was found!

Return ParseGPRMC(sentence)

Case Else

' Indicate that the sentence was not recognized

Return False

End Select

End Function

' Divides a sentence into individual words

Public Function GetWords(ByVal sentence As String) As String()

Return sentence.Split(","c)

End Function

' Interprets a $GPRMC message

Public Function ParseGPRMC(ByVal sentence As String) As Boolean

' Divide the sentence into words

Dim Words() As String = GetWords(sentence)

' Do we have enough values to describe our location?

If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _

Words(6) <> "" Then

' Yes. Extract latitude and longitude

Dim Latitude As String = Words(3).Substring(0, 2) & "°" ' Append hours

Latitude = Latitude & Words(3).Substring(2) & """" ' Append minutes

Latitude = Latitude & Words(4) ' Append the hemisphere

Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours

Longitude = Longitude & Words(5).Substring(3) & """" ' Append minutes

Longitude = Longitude & Words(6) ' Append the hemisphere

' Notify the calling application of the change

RaiseEvent PositionReceived(Latitude, Longitude)

End If

' Do we have enough values to parse satellite-derived time?

If Words(1) <> "" Then

' Yes. Extract hours, minutes, seconds and milliseconds

Dim UtcHours As Integer = CType(Words(1).Substring(0, 2), Integer)

Dim UtcMinutes As Integer = CType(Words(1).Substring(2, 2), Integer)

Dim UtcSeconds As Integer = CType(Words(1).Substring(4, 2), Integer)

Dim UtcMilliseconds As Integer

' Extract milliseconds if it is available

If Words(1).Length > 7 Then UtcMilliseconds = _

CType(Single.Parse(Words(1).Substring(6), _

CultureInfo.InvariantCulture) * 1000, Integer)

' Now build a DateTime object with all values

Dim Today As DateTime = System.DateTime.Now.ToUniversalTime

Dim SatelliteTime As New System.DateTime(Today.Year, Today.Month, _

Today.Day, UtcHours, UtcMinutes, UtcSeconds, UtcMilliseconds)

' Notify of the new time, adjusted to the local time zone

RaiseEvent DateTimeChanged(SatelliteTime.ToLocalTime)

End If

' Do we have enough information to extract the current speed?

If Words(7) <> "" Then

' Yes. Convert it into MPH

Dim Speed As Double = CType(Words(7), Double) * 1.150779

' If we're over 55MPH then trigger a speed alarm!

If Speed > 55 Then RaiseEvent SpeedLimitReached()

' Notify of the new speed

RaiseEvent SpeedReceived(Speed)

End If

' Do we have enough information to extract bearing?

If Words(8) <> "" Then

' Indicate that the sentence was recognized

Dim Bearing As Double = CType(Words(8), Double)

RaiseEvent BearingReceived(Bearing)

End If

' Indicate that the sentence was recognized

Return True

End Function

' Returns True if a sentence's checksum matches the calculated checksum

Public Function IsValid(ByVal sentence As String) As Boolean

' Compare the characters after the asterisk to the calculation

Return sentence.Substring(sentence.IndexOf("*") + 1) = _

GetChecksum(sentence)

End Function

' Calculates the checksum for a sentence

Public Function GetChecksum(ByVal sentence As String) As String

' Loop through all chars to get a checksum

Dim Character As Char

Dim Checksum As Integer

For Each Character In sentence

Select Case Character

Case "$"c

' Ignore the dollar sign

Case "*"c

' Stop processing before the asterisk

Exit For

Case Else

' Is this the first value for the checksum?

If Checksum = 0 Then

' Yes. Set the checksum to the value

Checksum = Convert.ToByte(Character)

Else

' No. XOR the checksum with this character's value

Checksum = Checksum Xor Convert.ToByte(Character)

End If

End Select

' Return the checksum formatted as a two-character hexadecimal

Return Checksum.ToString("X2")

End Function

End Class

Are We Fixed Yet?

The $GPRMC sentence includes a value which indicates whether or not a "fix" has been obtained. A fix is possible when the signal strength of at least three satellites is strong enough to be involved in calculating your location. If at least four satellites are involved, altitude also becomes known. The third word of the $GPRMC sentence is one of two letters: "A" for "active", where a fix is obtained, or "V" for "invalid" where no fix is present. Listing 1-6 includes code to examine this character and report on fix status.

(Listing 1-6: The interpreter now knows when the device has obtained a fix.)

'*******************************************************

'**  Listing 1-6.  Extracting satellite fix status

'*******************************************************

Public Class NmeaInterpreter

  ' Raised when the current location has changed
  Public Event PositionReceived(ByVal latitude As String, _
                                ByVal longitude As String)
  Public Event DateTimeChanged(ByVal dateTime As DateTime)
  Public Event BearingReceived(ByVal bearing As Double)
  Public Event SpeedReceived(ByVal speed As Double)
  Public Event SpeedLimitReached()
  Public Event FixObtained()
  Public Event FixLost()
  ' Processes information from the GPS receiver
  Public Function Parse(ByVal sentence As String) As Boolean
    ' Discard the sentence if its checksum does not match our calculated
    ' checksum
    If Not IsValid(sentence) Then Return False
    ' Look at the first word to decide where to go next
    Select Case GetWords(sentence)(0)
      Case "$GPRMC"      ' A "Recommended Minimum" sentence was found!
        Return ParseGPRMC(sentence)
     Case Else
        ' Indicate that the sentence was not recognized
        Return False
    End Select
  End Function
  ' Divides a sentence into individual words
  Public Function GetWords(ByVal sentence As String) As String()
    Return sentence.Split(","c)
  End Function
 ' Interprets a $GPRMC message
 Public Function ParseGPRMC(ByVal sentence As String) As Boolean
    ' Divide the sentence into words
    Dim Words() As String = GetWords(sentence)
    ' Do we have enough values to describe our location?
    If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _
                                Words(6) <> "" Then
      ' Yes. Extract latitude and longitude
      Dim Latitude As String = Words(3).Substring(0, 2) & "°"  ' Append hours
      Latitude = Latitude & Words(3).Substring(2) & """"    ' Append minutes
      Latitude = Latitude & Words(4)     ' Append the hemisphere
      Dim Longitude As String = Words(5).Substring(0, 3) & "°"  ' Append hours
      Longitude = Longitude & Words(5).Substring(3) & """"    ' Append minutes
      Longitude = Longitude & Words(6)     ' Append the hemisphere
      ' Notify the calling application of the change
      RaiseEvent PositionReceived(Latitude, Longitude)
    End If
    ' Do we have enough values to parse satellite-derived time?
    If Words(1) <> "" Then
      ' Yes. Extract hours, minutes, seconds and milliseconds
      Dim UtcHours As Integer = CType(Words(1).Substring(0, 2), Integer)
      Dim UtcMinutes As Integer = CType(Words(1).Substring(2, 2), Integer)
      Dim UtcSeconds As Integer = CType(Words(1).Substring(4, 2), Integer)
      Dim UtcMilliseconds As Integer
      ' Extract milliseconds if it is available
      If Words(1).Length > 7 Then UtcMilliseconds = _
                CType(Single.Parse(Words(1).Substring(6), _
                     CultureInfo.InvariantCulture) * 1000, Integer)
      ' Now build a DateTime object with all values
      Dim Today As DateTime = System.DateTime.Now.ToUniversalTime
      Dim SatelliteTime As New System.DateTime(Today.Year, Today.Month, _
        Today.Day, UtcHours, UtcMinutes, UtcSeconds, UtcMilliseconds)
      ' Notify of the new time, adjusted to the local time zone
      RaiseEvent DateTimeChanged(SatelliteTime.ToLocalTime)
    End If
    ' Do we have enough information to extract the current speed?
    If Words(7) <> "" Then
      ' Yes.  Convert it into MPH
      Dim Speed As Double = CType(Words(7), Double) * 1.150779
      ' If we're over 55MPH then trigger a speed alarm!
      If Speed > 55 Then RaiseEvent SpeedLimitReached()
      ' Notify of the new speed
      RaiseEvent SpeedReceived(Speed)
    End If
    ' Do we have enough information to extract bearing?
    If Words(8) <> "" Then
      ' Indicate that the sentence was recognized
      Dim Bearing As Double = CType(Words(8), Double)
      RaiseEvent BearingReceived(Bearing)
    End If
    ' Does the device currently have a satellite fix?
    If Words(2) <> "" Then
      Select Case Words(2)
        Case "A"
          RaiseEvent FixObtained()
        Case "V"
          RaiseEvent FixLost()
      End Select
    End If
    ' Indicate that the sentence was recognized
    Return True
  End Function
  ' Returns True if a sentence's checksum matches the calculated checksum
  Public Function IsValid(ByVal sentence As String) As Boolean
    ' Compare the characters after the asterisk to the calculation
    Return sentence.Substring(sentence.IndexOf("*") + 1) = GetChecksum(sentence)
  End Function
  ' Calculates the checksum for a sentence
  Public Function GetChecksum(ByVal sentence As String) As String
    ' Loop through all chars to get a checksum
    Dim Character As Char
    Dim Checksum As Integer
    For Each Character In sentence
      Select Case Character
        Case "$"c
          ' Ignore the dollar sign
        Case "*"c
          ' Stop processing before the asterisk
          Exit For
        Case Else
          ' Is this the first value for the checksum?
          If Checksum = 0 Then
            ' Yes. Set the checksum to the value
            Checksum = Convert.ToByte(Character)
          Else
            ' No. XOR the checksum with this character's value
            Checksum = Checksum Xor Convert.ToByte(Character)
          End If
      End Select
    Next
    ' Return the checksum formatted as a two-character hexadecimal
    Return Checksum.ToString("X2")
  End Function
End Class

As you can see, a whole lot of information is packed into a single NMEA sentence. Now that the $GPRMC sentence has been fully interpreted, the interpreter can be expanded to support a second sentence: $GPGSV. This sentence describes the configuration of satellites overhead, in real-time.

Real-Time Satellite Tracking

Knowing the location of satellites is important when determining how precise readings are and how stable a GPS fix is. Since GPS precision will be covered in detail in Part 2 of this series, this section will focus on interpreting satellite location and signal strength. There are twenty-four operational satellites in orbit. Satellites are spaced in orbit so that at any time a minimum of six satellites will be in view to users anywhere in the world. Satellites are constantly in motion, which is good because it prevents the existence of "blind spots" in the world with little or no satellite visibility. Just like finding stars in the sky, satellite locations are described as the combination of an azimuth and an elevation. As mentioned above, azimuth measures a direction around the horizon. Elevation measures a degree value up from the horizon between 0° and 90°, where 0° represents the horizon and 90° represents "zenith", directly overhead. So, if the device says a satellite's azimuth is 45° and its elevation is 45°, the satellite is located halfway up from the horizon towards the northeast. In addition to location, devices report each satellite's "Pseudo-Random Code" (or PRC) which is a number used to uniquely identify one satellite from another. Here's an example of a $GPGSV sentence:

$GPGSV,3,1,10,24,82,023,40,05,62,285,32,01,62,123,00,17,59,229,28*70

Each sentence contains up to four blocks of satellite information, comprised of four words. For example, the first block is "24,82,023,40" and the second block is "05,62,285,32" and so on. The first word of each block gives the satellite's PRC. The second word gives each satellite's elevation, followed by azimuth and signal strength. If this satellite information were to be shown graphically, it would look like figure 1-1.

(Figure 1-1: Graphical representation of a $GPGSV sentence, where the center of the circle marks the current position and the edge of the circle marks the horizon.)

Perhaps, the most important number in this sentence is the "signal-to-noise ratio" (or SNR for short). This number indicates how strongly a satellite's radio signal is being received. Remember, satellites transmit signals at the same strength, but things like trees and walls can obscure a signal beyond recognition. Typical SNR values are between zero and fifty, where fifty means an excellent signal. (SNR can be as high as ninety-nine, but I've never seen readings above fifty even in wide open sky.) In Figure 1-1, the green satellites indicate a strong signal, whereas the yellow satellite signifies a moderate signal (in Part II, I will provide a way to classify signal strengths). Satellite #1's signal is completely obscured. Listing 1-7 shows the interpreter after it is expanded to read satellite info.

(Listing 1-7: The interpreter is improved to interpret the location of GPS satellites currently in view.)

'*******************************************************

'**  Listing 1-7.  Extracting satellite information

'*******************************************************

Public Class NmeaInterpreter

  ' Raised when the current location has changed
  Public Event PositionReceived(ByVal latitude As String, _
                                ByVal longitude As String)
  Public Event DateTimeChanged(ByVal dateTime As DateTime)
  Public Event BearingReceived(ByVal bearing As Double)
  Public Event SpeedReceived(ByVal speed As Double)
  Public Event SpeedLimitReached()
  Public Event FixObtained()
  Public Event FixLost()
  Public Event SatelliteReceived(ByVal pseudoRandomCode As Integer, _
    ByVal azimuth As Integer, _
    ByVal elevation As Integer, _
    ByVal signalToNoiseRatio As Integer)
  ' Processes information from the GPS receiver
  Public Function Parse(ByVal sentence As String) As Boolean
    ' Discard the sentence if its checksum does not match our calculated
    ' checksum
    If Not IsValid(sentence) Then Return False
    ' Look at the first word to decide where to go next
    Select Case GetWords(sentence)(0)
      Case "$GPRMC"      ' A "Recommended Minimum" sentence was found!
        Return ParseGPRMC(sentence)
      Case "$GPGSV"      ' A "Satellites in View" message was found
        Return ParseGPGSV(sentence)
      Case Else
        ' Indicate that the sentence was not recognized
        Return False
    End Select
  End Function
  ' Divides a sentence into individual words
  Public Function GetWords(ByVal sentence As String) As String()
    Return sentence.Split(","c)
  End Function

' Interprets a $GPRMC message
Public Function ParseGPRMC(ByVal sentence As String) As Boolean
    ' Divide the sentence into words
    Dim Words() As String = GetWords(sentence)
    ' Do we have enough values to describe our location?
    If Words(3) <> "" And Words(4) <> "" And Words(5) <> "" And _
                                Words(6) <> "" Then
      ' Yes. Extract latitude and longitude
      Dim Latitude As String = Words(3).Substring(0, 2) & "°"  ' Append hours
      Latitude = Latitude & Words(3).Substring(2) & """"    ' Append minutes
      Latitude = Latitude & Words(4)     ' Append the hemisphere
      Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours
      Longitude = Longitude & Words(5).Substring(3) & """"    ' Append minutes
      Longitude = Longitude & Words(6)     ' Append the hemisphere
      ' Notify the calling application of the change
      RaiseEvent PositionReceived(Latitude, Longitude)
    End If
    ' Do we have enough values to parse satellite-derived time?
    If Words(1) <> "" Then
      ' Yes. Extract hours, minutes, seconds and milliseconds
      Dim UtcHours As Integer = CType(Words(1).Substring(0, 2), Integer)
      Dim UtcMinutes As Integer = CType(Words(1).Substring(2, 2), Integer)
      Dim UtcSeconds As Integer = CType(Words(1).Substring(4, 2), Integer)
      Dim UtcMilliseconds As Integer
      ' Extract milliseconds if it is available
      If Words(1).Length > 7 Then UtcMilliseconds = _
                CType(Single.Parse(Words(1).Substring(6), _
                     CultureInfo.InvariantCulture) * 1000, Integer)
      ' Now build a DateTime object with all values
      Dim Today As DateTime = System.DateTime.Now.ToUniversalTime
      Dim SatelliteTime As New System.DateTime(Today.Year, Today.Month, _
        Today.Day, UtcHours, UtcMinutes, UtcSeconds, UtcMilliseconds)
      ' Notify of the new time, adjusted to the local time zone
      RaiseEvent DateTimeChanged(SatelliteTime.ToLocalTime)
    End If
    ' Do we have enough information to extract the current speed?
    If Words(7) <> "" Then
      ' Yes.  Convert it into MPH
      Dim Speed As Double = CType(Words(7), Double) * 1.150779
      ' If we're over 55MPH then trigger a speed alarm!
      If Speed > 55 Then RaiseEvent SpeedLimitReached()
      ' Notify of the new speed
      RaiseEvent SpeedReceived(Speed)
    End If
    ' Do we have enough information to extract bearing?
    If Words(8) <> "" Then
      ' Indicate that the sentence was recognized
      Dim Bearing As Double = CType(Words(8), Double)
      RaiseEvent BearingReceived(Bearing)
    End If
    ' Does the device currently have a satellite fix?
    If Words(2) <> "" Then
      Select Case Words(2)
        Case "A"
          RaiseEvent FixObtained()
        Case "V"
          RaiseEvent FixLost()
      End Select
    End If
    ' Indicate that the sentence was recognized
    Return True
  End Function

  ' Interprets a "Satellites in View" NMEA sentence
  Public Function ParseGPGSV(ByVal sentence As String) As Boolean
    Dim PseudoRandomCode As Integer
    Dim Azimuth As Integer
    Dim Elevation As Integer
    Dim SignalToNoiseRatio As Integer
    ' Divide the sentence into words
    Dim Words() As String = GetWords(sentence)
    ' Each sentence contains four blocks of satellite information.
    ' Read each block and report each satellite's information
    Dim Count As Integer
    For Count = 1 To 4
      ' Does the sentence have enough words to analyze?
      If (Words.Length - 1) >= (Count * 4 + 3) Then
        ' Yes.  Proceed with analyzing the block.  Does it contain any
        ' information?
        If Words(Count * 4) <> "" And Words(Count * 4 + 1) <> "" _
        And Words(Count * 4 + 2) <> "" And Words(Count * 4 + 3) <> "" Then
          ' Yes. Extract satellite information and report it
          PseudoRandomCode = CType(Words(Count * 4), Integer)
          Elevation = CType(Words(Count * 4 + 1), Integer)
          Azimuth = CType(Words(Count * 4 + 2), Integer)
          SignalToNoiseRatio = CType(Words(Count * 4 + 2), Integer)
          ' Notify of this satellite's information
          RaiseEvent SatelliteReceived(PseudoRandomCode, Azimuth, Elevation, _
            SignalToNoiseRatio)
        End If
      End If
    Next
    ' Indicate that the sentence was recognized
    Return True
  End Function

  ' Returns True if a sentence's checksum matches the calculated checksum
  Public Function IsValid(ByVal sentence As String) As Boolean
    ' Compare the characters after the asterisk to the calculation
    Return sentence.Substring(sentence.IndexOf("*") + 1) = GetChecksum(sentence)
  End Function

  ' Calculates the checksum for a sentence
  Public Function GetChecksum(ByVal sentence As String) As String
    ' Loop through all chars to get a checksum
    Dim Character As Char
    Dim Checksum As Integer
    For Each Character In sentence
      Select Case Character
        Case "$"c
          ' Ignore the dollar sign
        Case "*"c
          ' Stop processing before the asterisk
          Exit For
        Case Else
          ' Is this the first value for the checksum?
          If Checksum = 0 Then
            ' Yes. Set the checksum to the value
            Checksum = Convert.ToByte(Character)
          Else
            ' No. XOR the checksum with this character's value
            Checksum = Checksum Xor Convert.ToByte(Character)
          End If
      End Select
    Next
    ' Return the checksum formatted as a two-character hexadecimal
    Return Checksum.ToString("X2")
  End Function
End Class

A World-Class Interpreter

International readers may have spotted a subtle problem early on that was not handled in the listings - numbers were being reported in the numeric format used in the United States! Countries like Belgium and Switzerland which use different formats for numbers, require adjustments to the interpreter in order to work at all. Fortunately, the .NET Framework includes built-in support for converting numbers between different cultures, so the changes to the interpreter required are straightforward. In the interpreter, the only fractional value is speed, so only one change is necessary. The NmeaCultureInfo variable represents the culture used for numbers within NMEA sentences. The Double.Parse method is then used with this variable to convert speed into the machine's local culture. Listing 1-8 shows the completed interpreter, now ready for use internationally.

(Listing 1-8: The completed interpreter, suitable for use anywhere in the world.)

'*************************************************************

'**  Listing 1-8.  Adding support for international cultures

'*************************************************************

Imports System.Globalization

Public Class NmeaInterpreter

  ' Represents the EN-US culture, used for numbers in NMEA sentences

  Private NmeaCultureInfo As New CultureInfo("en-US")

  ' Used to convert knots into miles per hour

  Private MPHPerKnot As Double = Double.Parse("1.150779", NmeaCultureInfo)

  ' Raised when the current location has changed

  Public Event PositionReceived(ByVal latitude As String,_

                                ByVal longitude As String)

  Public Event DateTimeChanged(ByVal dateTime As DateTime)

  Public Event BearingReceived(ByVal bearing As Double)

  Public Event SpeedReceived(ByVal speed As Double)

  Public Event SpeedLimitReached()

  Public Event FixObtained()

  Public Event FixLost()

  Public Event SatelliteReceived(ByVal pseudoRandomCode As Integer, _

    ByVal azimuth As Integer, _

    ByVal elevation As Integer, _

    ByVal signalToNoiseRatio As Integer)

  ' Processes information from the GPS receiver

  Public Function Parse(ByVal sentence As String) As Boolean

    ' Discard the sentence if its checksum does not match our calculated

    ' checksum

    If Not IsValid(sentence) Then Return False

    ' Look at the first word to decide where to go next

    Select Case GetWords(sentence)(0)

      Case "$GPRMC"      ' A "Recommended Minimum" sentence was found!

        Return ParseGPRMC(sentence)

      Case "$GPGSV"

        Return ParseGPGSV(sentence)

      Case Else

        ' Indicate that the sentence was not recognized

        Return False

    End Select

  End Function

  ' Divides a sentence into individual words

  Public Function GetWords(ByVal sentence As String) As String()

    Return sentence.Split(","c)

  End Function

  ' Interprets a $GPRMC message

  Public Function ParseGPRMC(ByVal sentence As String) As Boolean

    ' Divide the sentence into words

    Dim Words() As String = GetWords(sentence)

    ' Do we have enough values to describe our location?

    If Words(3) <> "" And Words(4) <> "" _

    And Words(5) <> "" And Words(6) <> "" Then

      ' Yes. Extract latitude and longitude

      Dim Latitude As String = Words(3).Substring(0, 2) & "°"  ' Append hours

      Latitude = Latitude & Words(3).Substring(2) & """"    ' Append minutes

      Latitude = Latitude & Words(4)     ' Append the hemisphere

      Dim Longitude As String = Words(5).Substring(0, 3) & "°" ' Append hours

      Longitude = Longitude & Words(5).Substring(3) & """"    ' Append minutes

      Longitude = Longitude & Words(6)     ' Append the hemisphere

      ' Notify the calling application of the change

      RaiseEvent PositionReceived(Latitude, Longitude)

    End If

    ' Do we have enough values to parse satellite-derived time?

    If Words(1) <> "" Then

      ' Yes. Extract hours, minutes, seconds and milliseconds

      Dim UtcHours As Integer = CType(Words(1).Substring(0, 2), Integer)

      Dim UtcMinutes As Integer = CType(Words(1).Substring(2, 2), Integer)

      Dim UtcSeconds As Integer = CType(Words(1).Substring(4, 2), Integer)

      Dim UtcMilliseconds As Integer

      ' Extract milliseconds if it is available

      If Words(1).Length > 7 Then

        UtcMilliseconds = CType(Single.Parse(Words(1).Substring(6), _

                      CultureInfo.InvariantCulture) * 1000, Integer)

      End If

      ' Now build a DateTime object with all values

      Dim Today As DateTime = System.DateTime.Now.ToUniversalTime

      Dim SatelliteTime As New System.DateTime(Today.Year, Today.Month, _

        Today.Day, UtcHours, UtcMinutes, UtcSeconds, UtcMilliseconds)

      ' Notify of the new time, adjusted to the local time zone

      RaiseEvent DateTimeChanged(SatelliteTime.ToLocalTime)

    End If

    ' Do we have enough information to extract the current speed?

    If Words(7) <> "" Then

      ' Yes.  Parse the speed and convert it to MPH

      Dim Speed As Double = Double.Parse(Words(7), NmeaCultureInfo) _

                          * MPHPerKnot

      ' Notify of the new speed

      RaiseEvent SpeedReceived(Speed)

      ' Are we over the highway speed limit?

      If Speed > 55 Then RaiseEvent SpeedLimitReached()

    End If

    ' Do we have enough information to extract bearing?

    If Words(8) <> "" Then

      ' Indicate that the sentence was recognized

      Dim Bearing As Double = CType(Words(8), Double)

      RaiseEvent BearingReceived(Bearing)

    End If

    ' Does the device currently have a satellite fix?

    If Words(2) <> "" Then

      Select Case Words(2)

        Case "A"

          RaiseEvent FixObtained()

        Case "V"

          RaiseEvent FixLost()

      End Select

    End If

    ' Indicate that the sentence was recognized

    Return True

  End Function

  ' Interprets a "Satellites in View" NMEA sentence

  Public Function ParseGPGSV(ByVal sentence As String) As Boolean

    Dim PseudoRandomCode As Integer

    Dim Azimuth As Integer

    Dim Elevation As Integer

    Dim SignalToNoiseRatio As Integer

    ' Divide the sentence into words

    Dim Words() As String = GetWords(sentence)

    ' Each sentence contains four blocks of satellite information.

    ' Read each block

    ' and report each satellite's information

    Dim Count As Integer

    For Count = 1 To 4

      ' Does the sentence have enough words to analyze?

      If (Words.Length - 1) >= (Count * 4 + 3) Then

        ' Yes. Proceed with analyzing the block. Does it contain any information?

        If Words(Count * 4) <> "" And Words(Count * 4 + 1) <> "" _

        And Words(Count * 4 + 2) <> "" And Words(Count * 4 + 3) <> "" Then

          ' Yes. Extract satellite information and report it

          PseudoRandomCode = CType(Words(Count * 4), Integer)

          Elevation = CType(Words(Count * 4 + 1), Integer)

          Azimuth = CType(Words(Count * 4 + 2), Integer)

          SignalToNoiseRatio = CType(Words(Count * 4 + 2), Integer)

          ' Notify of this satellite's information

          RaiseEvent SatelliteReceived(PseudoRandomCode, Azimuth, Elevation, _

            SignalToNoiseRatio)

        End If

      End If

    Next

    ' Indicate that the sentence was recognized

    Return True

  End Function

  ' Returns True if a sentence's checksum matches the calculated checksum

  Public Function IsValid(ByVal sentence As String) As Boolean

    ' Compare the characters after the asterisk to the calculation

    Return sentence.Substring(sentence.IndexOf("*") + 1) = GetChecksum(sentence)

  End Function

  ' Calculates the checksum for a sentence

  Public Function GetChecksum(ByVal sentence As String) As String

    ' Loop through all chars to get a checksum

    Dim Character As Char

    Dim Checksum As Integer

    For Each Character In sentence

      Select Case Character

        Case "$"c

          ' Ignore the dollar sign

        Case "*"c

          ' Stop processing before the asterisk

          Exit For

        Case Else

          ' Is this the first value for the checksum?

          If Checksum = 0 Then

            ' Yes. Set the checksum to the value

            Checksum = Convert.ToByte(Character)

          Else

            ' No. XOR the checksum with this character's value

            Checksum = Checksum Xor Convert.ToByte(Character)

          End If

      End Select

    Next

    ' Return the checksum formatted as a two-character hexadecimal

    Return Checksum.ToString("X2")

  End Function

End Class

Final Thoughts

You should now have a good understanding that an NMEA interpreter is all about extracting words from sentences. You can harness the power of satellites to determine your location, synchronize your computer clock, find your direction, watch your speed, and point to a satellite in the sky on a cloudy day. This interpreter will also work with the .NET Compact Framework without any modifications. If sentences were also stored in a file, the interpreter can be used to play back an entire road trip. These are all great features, especially considering the small size of the class, but is this interpreter ready to drive your car and pilot an airplane? Not quite yet. There is one important topic remaining which is required to make GPS applications safe for the real world: precision. GPS devices are designed to report any information they find, even if the information is inaccurate. In fact, information about the current location can be off as much as half a football field, even when devices are equipped with the latest DGPS and WAAS correction technologies! Unfortunately, several developers are not aware of this problem. There are some third-party components out there which are not suitable for commercial applications that require enforcing a minimum level of precision. Keep this article handy, however, because in Part II of this series, I will explain precision enforcement in detail and take the interpreter even further to make it suitable for professional, high-precision applications!

2 Comments

Join the conversation! Your thoughts help the community grow.

Mahshid Fard9y ago
Can you please type this code in c# ?
leduc18y ago
zip file not usable for beginner or advanced, (with visual studio), even windows mobile 5.0 pocket pc SDK of microsoft, (gpsSample project) not work properly, (think to see peter Foot contribution for bug) is it possible to have a good and simple contribution who works on a huge family of product ?