how index works in sql ?.

Question

~> how index works in sql ?. ~> which type of indexes in sql. ~> indexes examples

Sreekanth Reddy · Answer

Indexers are used for retrieving the data that what the query specifies. For Ex : select * from Employee where Id = 2; In the above query we are retrieving by using id with value 2. Generally it retrieves by scanning from first record onwards. Scan 1---> 1st record. Id = 1 Scan 2---> 2nd record. Id = 2 so completely it does 2 scans. Not let us assume in our table we are having 1000 records exists. Now if we put a query as, select * from Employee where Id = 1000; it needs to scan 999 records. Which consumes time. ----------------------------------------------------------------------------------------------- Solution by indexers: We are having indexers to minimize the unwanted scans by the internal algorithm. What the algorithm does is: Out of 1000 records it creates two sets as : set 1 --- 0-5000 set 2 --- 501 - 1000 Now whenever we write the query : select * from Employee where Id = 1000; It leaves the first set 1 and scans the second set 2. Such that it reduces the scans of 500 records right... We are having 2 types of indexes: 1) Clustered index --- if we assign primary key to any column by default it acts as a clustered index. 2) Non clustered Index -- we can specify to a particular column for faster access results Ex: CREATE NONCLUSTERED tablename ON columnname(name ASC) For more infor about Indexers please find the below article really very nice : https://www.sqlshack.com/what-is-the-difference-between-clustered-and-non-clustered-indexes-in-sql-server/ Accept the answer If it helps. Else come up with your query. Thank you.

Brajesh Kumar · Answer

Why is it needed? When data is stored on disk-based storage devices, it is stored as blocks of data. These blocks are accessed in their entirety, making them the atomic disk access operation. Disk blocks are structured in much the same way as linked lists; both contain a section for data, a pointer to the location of the next node (or block), and both need not be stored contiguously. Due to the fact that a number of records can only be sorted on one field, we can state that searching on a field that isn’t sorted requires a Linear Search which requires N/2 block accesses (on average), where N is the number of blocks that the table spans. If that field is a non-key field (i.e. doesn’t contain unique entries) then the entire tablespace must be searched at N block accesses. Whereas with a sorted field, a Binary Search may be used, which has log2 N block accesses. Also since the data is sorted given a non-key field, the rest of the table doesn’t need to be searched for duplicate values, once a higher value is found. Thus the performance increase is substantial. What is indexing? Indexing is a way of sorting a number of records on multiple fields. Creating an index on a field in a table creates another data structure which holds the field value, and a pointer to the record it relates to. This index structure is then sorted, allowing Binary Searches to be performed on it. The downside to indexing is that these indexes require additional space on the disk since the indexes are stored together in a table using the MyISAM engine, this file can quickly reach the size limits of the underlying file system if many fields within the same table are indexed. How does it work? Firstly, let’s outline a sample database table schema; Field name Data type Size on disk id (Primary key) Unsigned INT 4 bytes firstName Char(50) 50 bytes lastName Char(50) 50 bytes emailAddress Char(100) 100 bytes Note : char was used in place of varchar to allow for an accurate size on disk value. This sample database contains five million rows and is unindexed. The performance of several queries will now be analyzed. These are a query using the id (a sorted key field) and one using the firstName (a non-key unsorted field). Example 1 - sorted vs unsorted fields Given our sample database of r = 5,000,000 records of a fixed size giving a record length of R = 204 bytes and they are stored in a table using the MyISAM engine which is using the default block size B = 1,024 bytes. The blocking factor of the table would be bfr = (B/R) = 1024/204 = 5 records per disk block. The total number of blocks required to hold the table is N = (r/bfr) = 5000000/5 = 1,000,000 blocks. A linear search on the id field would require an average of N/2 = 500,000 block accesses to find a value, given that the id field is a key field. But since the id field is also sorted, a binary search can be conducted requiring an average of log2 1000000 = 19.93 = 20 block accesses. Instantly we can see this is a drastic improvement. Now the firstName field is neither sorted nor a key field, so a binary search is impossible, nor are the values unique, and thus the table will require searching to the end for an exact N = 1,000,000 block accesses. It is this situation that indexing aims to correct. Given that an index record contains only the indexed field and a pointer to the original record, it stands to reason that it will be smaller than the multi-field record that it points to. So the index itself requires fewer disk blocks than the original table, which therefore requires fewer block accesses to iterate through. The schema for an index on the firstName field is outlined below; Field name Data type Size on disk firstName Char(50) 50 bytes (record pointer) Special 4 bytes Note : Pointers in MySQL are 2, 3, 4 or 5 bytes in length depending on the size of the table. Example 2 - indexing Given our sample database of r = 5,000,000 records with an index record length of R = 54 bytes and using the default block size B = 1,024 bytes. The blocking factor of the index would be bfr = (B/R) = 1024/54 = 18 records per disk block. The total number of blocks required to hold the index is N = (r/bfr) = 5000000/18 = 277,778 blocks. Now a search using the firstName field can utilize the index to increase performance. This allows for a binary search of the index with an average of log2 277778 = 18.08 = 19 block accesses. To find the address of the actual record, which requires a further block access to read, bringing the total to 19 + 1 = 20 block accesses, a far cry from the 1,000,000 block accesses required to find a firstName match in the non-indexed table. When should it be used? Given that creating an index requires additional disk space (277,778 blocks extra from the above example, a ~28% increase), and that too many indexes can cause issues arising from the file systems size limits, careful thought must be used to select the correct fields to index. Since indexes are only used to speed up the searching for a matching field within the records, it stands to reason that indexing fields used only for output would be simply a waste of disk space and processing time when doing an insert or delete operation, and thus should be avoided. Also given the nature of a binary search, the cardinality or uniqueness of the data is important. Indexing on a field with a cardinality of 2 would split the data in half, whereas a cardinality of 1,000 would return approximately 1,000 records. With such a low cardinality the effectiveness is reduced to a linear sort, and the query optimizer will avoid using the index if the cardinality is less than 30% of the record number, effectively making the index a waste of space.

Puneet Kankar · Answer

Please referral given below links. https://www.youtube.com/watch?v=i_FwqzYMUvk https://www.youtube.com/watch?v=NGslt99VOCw

Sanwar Ranwa · Answer

Hello Bhavesh About Index in SQL The SQL Server engine uses an index in much the same way a reader uses a book index. For example, one way to find all references to CHERUKURI statements in a SQL book would be to begin on page one and scan each page of the book. We could mark each time we find the word CHERUKURI until we reach the end of the book. This approach is pretty time consuming and laborious. Alternately, we can also use the index in the back of the book to find a page number for each occurrence of the CHERUKURI statements. This approach produces the same results as above, but with tremendous savings in time. When a SQL Server has no index to use for searching, the result is similar to the reader who looks at every page in a book to find a word: the SQL engine needs to visit every row in a table. In database terminology we call this behavior a table scan, or just scan. A table scan is not always a problem, and is sometimes unavoidable. However, as a table grows to thousands of rows and then millions of rows and beyond, scans become correspondingly slower and more expensive. Index Working The database takes the columns specified in a CREATE INDEX command and sorts the values into a special data structure known as a B-tree. A B-tree structure supports fast searches with a minimum amount of disk reads, allowing the database engine to quickly find the starting and stopping points for the query we are using. Conceptually, we may think of an index as shown in the diagram below. On the left, each index entry contains the index key (UnitPrice). Each entry also includes a reference (which points) to the table rows which share that particular value and from which we can retrieve the required information. Much like the index in the back of a book helps us to find keywords quickly, so the database is able to quickly narrow the number of records it must examine to a minimum by using the sorted list of UnitPrice values stored in the index. We have avoided a table scan to fetch the query results. Given this sketch of how indexes work, lets examine some of the scenarios where indexes offer a benefit. Type of Index Clustered Index Non-Clusterd Index. Check More https://www.sqlshack.com/what-is-the-difference-between-clustered-and-non-clustered-indexes-in-sql-server/ Index Example https://www.techonthenet.com/sql_server/indexes.php https://stackoverflow.com/questions/1108/how-does-database-indexing-work https://www.red-gate.com/simple-talk/sql/learn-sql-server/sql-server-index-basics/ https://data-flair.training/blogs/sql-index/

Sourav Mukherjee · Answer

Cutting long story short. Think indexes are like the index of the books and the glossary at the book. Clustered indexes are Front book indexes. Glossary is the non clustered indexes. Many kinds of indexes, mostly clustered, non clustered, covering and included columns. For examples, check BOL

how index works in sql ?.

Answers (5)