TESCOM ER3000

Rigane Mohamed

Hello,
I'm currently making a C # program to control a regulator TESCOM on PC via rs232 but I do not know how to do it knowing that I have the file "TESCOM.dll"in the directory; So please how I must do to send the "setpoint" and read the measured value "feedback " .
Does someone could please inform me.

Please help me !!!!!!!

Thank you in advance.

3 Replies

Know the answer? Post it — somebody with the same question will find it here.

Sam Hobbs15y ago
You should ask if anyone has converted the C sample(s) to C#. If not, ask if there are pinvoke definitions for the TESCOM.dll. If not then you need to write your own pinvoke definitions for the DLL. You can then use the C sample(s) for writing your program. If you have specific questions then you are much more likley to get help here if you ask specific questions.
Rigane Mohamed15y ago
I want to develop an application to write the setpoint value to the controller , and read the feedback every 25ms . For more information I invite you to read the help in this link ""http://docs.google.com/viewer?a=v&q=cache:n2puVdQMFnQJ:www.tescom-europe.com/uploads/tx_ttproducts/datasheet/ER3000UserManual.pdf+ER3000+Electronic+Pressure+Controller+User+Manual&hl=fr&pid=bl&srcid=ADGEESgSOSE8d3Q_pH2LDUs0X-LMDHd2YmSWHzeoy5md0mxW-aWJiH23wwCT5Qjm-zjZ83gc0bvWaVaD7OYUMsw2pTeroYYIZg21ndQ7KnIgbKFIxQ7WXzv36KZgWz4DOx-dluo3ku-F&sig=AHIEtbS4abEFqukG4-98sX_IBtwPSyF7Kg ""

cheers,
Suthish Nair15y ago
Welcome to C# Corner.
Hi,
Give more detailed information about the problem and of regulator TESCOM on PC via rs232, so we can help you.