How To Use Blue Light Filter In Windows 10

Introduction

 
An additional quality feature in Windows 10 is to enable a blue (night) light filter. The users can enable blue light filters in Windows 10 by using the in-built night light feature and also by third-party apps as well. But it is not a well-known feature among most Windows users.
 
Some monitors also have this in-built blue light filters or eye saver mode feature. For those users who have ordinary monitors which don't support night light or eye saver mode feature, Windows 10 has this unique feature.
 
A survey has shown that frequent exposure to blue light for hours on end can lead to damaged retinal cells. This can cause eye problems. Users who have to work long hours on blue (normal) light screens suffer eye strains and headache problems.
 
However, in Windows 10 there is a remedy. By enabling the eye saver mode (night light) feature, users can protect themselves from these problems.
 
Users can also schedule the night light or eye saver mode for a particular time or duration as per their requirements.
 
This tutorial will show you various steps on how to enable the blue light mode or eye saver mode (set-up the night light warmer color) in Windows 10.
 
Step 1
 
From the start menu, click on the "Settings" button.
 
Note:-
 
Alternatively, by pressing the "Windows + I " key, you can directly open the "Windows Settings". 
 
Step 2
 
"Windows Settings" will appear on the screen and then, click on the "System" option.
 
clkck on system option
 
Step 3
 
Click on the "Display" option.
 
click on the display option
 
Step 4
 
Click on the "Night light settings" option.
 
click on night light
 
Step 5
 
Now, turn on the night light settings.
 
turn on night light
 
Step 6
 
By sliding, you can adjust the warmer color temperature at night as per your requirement.
 
slide over it
 
Schedule Night Light
 
If you want to schedule the night light warmer color or eye saver mode for a particular time or duration, then follow the instructions below.
 
Step 7
 
"Turn On" the "Schedule night light" option.
 
turn on schedule night light
 
Step 8
 
Under the "Set hours" radio button, you can set the turn on and turn off time.
 
you can set hrs
 
In my case, I set up the turn-on time as 7:00 PM and turn-off time as 2:30 AM. This means, it will automatically turn on the night light warmer color or eye saver mode at 7:00 PM and turn it off at 2:30 AM.
 
setup the time hours
 

Conclusion

 
By following the above steps, you can enable or schedule the blue light filter or eye saver mode (set-up the night light warmer color) in Windows 10.
 
I hope you enjoyed this article. Follow C# Corner to learn more new and amazing things about Windows 10.
 
Thanks for reading this article.