Parsing Sentences and Building Text Statics in Visual Basic

Introduction:

This article describes three approaches to parsing the sentences from a body of text; three approaches are shown as a means of describing the pros and cons for performing this task using each different approach. The demonstration application also describes an approach to generating sentence count, word count, and character count statistics on a body of text.

test application running-in-windows8.gif

Figure 1: The test application running

The three approaches to parsing out the sentences from the body of text include:

Parse Reasonable: an approach based on splitting the text using typical sentence terminations where the sentence termination is retained,
Parse Best: an approach based on the use of splitting the text based upon the use of a regular expression and where the sentence termination is retained, and
Parse Without Endings: an approach to splitting the text using typically sentence terminations where the terminations are not retained as part of the sentence.

The demonstration application contains some default text in a text box control; three buttons used to parse the text using one of the three approaches mentioned, and three label controls used to display the summary statistics generated on the body of text. Once the application is run, clicking on any of the three buttons will result in the display of each of the parsed sentences within the list box control at the bottom of the form, and will result in the display of the summary statistics using the three labels in the upper right hand side of the form.

Getting Started:

In order to get started, unzip the included project and open the solution in the Visual Studio 2008 environment. In the solution explorer, you should note these files (Figure 2):

Figure 2: Solution Explorer

As you can see from Figure 2; there is a single Win Forms project containing a single form. All code required of this application is included in this form's code.

The Main Form (Form1.vb).

The main form of the application, Form1, contains all of the code necessary. The form contains default text within a text box control; the three buttons are used to execute each of the three functions used to parse the body of text into a collection of strings; one per sentence. You may replace, remove, or add to the text contained in the text box control to run the methods against your own text. Three label controls are used to display summary statistics (sentence, word, and character counts) on the text contained in the text box control. These summary statistics are updated each time the text is parsed into sentences.

If you'd care to open the code view up in the IDE you will see that the code file begins with the following library imports:

Imports System
Imports System.Collections
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Text.RegularExpressions

Note that the defaults have been altered and now include the reference to the regular expressions library.

Following the imports, the class and constructor are defined:

Public Class Form1

Public Sub New()

' This call is required by the Windows Form Designer.

InitializeComponent()

' Add any initialization after the InitializeComponent() call.

End Sub

Next up is a region entitled, "Best Sentence Parser"; this region contains a function entitled, "SplitSentences" which accepts a string as an argument. This method tends to yield the best results in terms of parsing sentences but may issue inaccurate values if the text contains errors. The region also contains a button click event handler used to evoke the SplitSentences function.

The code is annotated and reading through the notes will explain what is going on within the function.

#Region "Best Sentence Parser"

''' <summary>

''' This is generally the most accurate approach to

''' parsing a body of text into sentences to include

''' the sentence's termination (e.g., the period,

''' question mark, etc). This approach will handle

''' duplicate sentences with different terminations.

''' </summary>

''' <param name="sSourceText"></param>

''' <returns></returns>

''' <remarks></remarks>

Private Function SplitSentences(ByVal sSourceText As String) As ArrayList

' create a local string variable

' set to contain the string passed it

Dim sTemp As String = sSourceText

' create the array list that will

' be used to hold the sentences

Dim al As New ArrayList()

' split the sentences with a regular expression

Dim RegexSentenceParse As String() = _Regex.Split(sTemp, "(?<=['""A-Za-z0-9][\.\!\?])\s+(?=[A-Z])")

' loop the sentences

Dim i As Integer = 0

For i = 0 To RegexSentenceParse.Length - 1

' clean up the sentence one more time, trim it,

' and add it to the array list

Dim sSingleSentence As String = _

RegexSentenceParse(i).Replace(Environment.NewLine, String.Empty)

al.Add(sSingleSentence.Trim())

' update the statistics displayed on the text

' characters

lblCharCount.Text = "Character Count: " & _GenerateCharacterCount(sTemp).ToString()

' sentences

lblSentenceCount.Text = "Sentence Count: " & _GenerateSentenceCount(RegexSentenceParse).ToString()

' words

lblWordCount.Text = "Word Count: " & _GenerateWordCount(al).ToString()

' return the arraylist with

' all sentences added

Return al

End Function

''' <summary>

''' Calls the SplitSentences (best approach) method

''' to split the text into sentences and displays

''' the results in a list box

''' </summary>

''' <param name="sender"></param>

''' <param name="e"></param>

''' <remarks></remarks>

Private Sub btnParseNoEnding_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnParseNoEnding.Click

lstSentences.Items.Clear()

Dim al As New ArrayList()

al = SplitSentences(txtParagraphs.Text)

Dim i As Integer

For i = 0 To al.Count - 1

'populate a list box

lstSentences.Items.Add(al(i).ToString())

End Sub

#End Region

Next up is a region entitled, "Reasonable Sentence Parser"; this region contains a function entitled, "ReasonableParser" which accepts a string as an argument. This method tends to yield fair results in terms of parsing sentences but does not apply the proper sentence terminations if the input string contains duplicate sentence with different terminations. This issue could be resolved by use of a recursive function to continue to move through each instance of the duplicate sentence however it is less work to use the method indicated in the previous code region. The region also contains a button click event handler used to evoke the ReasonableParser function.

The code is annotated and reading through the notes will explain what is going on within the function.

#Region "Reasonable Sentence Parser"

''' <summary>

''' This does a fair job of parsing the sentences

''' unless there are duplicate sentences

''' you'd have to resort to recursion in order

''' to get through the issue of multiple duplicate sentences.

''' </summary>

''' <param name="sTextToParse"></param>

''' <returns></returns>

''' <remarks></remarks>

Private Function ReasonableParser(ByVal sTextToParse As String) As ArrayList

Dim al As New ArrayList()

' get a string from the contents of a textbox

Dim sTemp As String = sTextToParse

sTemp = sTemp.Replace(Environment.NewLine, " ")

' split the string using sentence terminations

Dim arrSplitChars As Char() = {".", "?", "!"} ' things that end a

sentence

'do the split

Dim splitSentences As String() = sTemp.Split(arrSplitChars,StringSplitOptions.RemoveEmptyEntries)

' loop the array of splitSentences

Dim i As Integer

For i = 0 To splitSentences.Length - 1

' find the position of each sentence in the

' original paragraph and get its termination ('.', '?', '!')

Dim pos As Integer = sTemp.IndexOf(splitSentences(i).ToString())

Dim arrChars As Char() = sTemp.Trim().ToCharArray()

Dim c As Char = arrChars(pos + splitSentences(i).Length)

' since this approach looks only for the first instance

' of the string, it does not handle duplicate sentences

' with different terminations. You could expand this

' approach to search for later instances of the same

' string to get the proper termination but the previous

' method of using the regular expression to split the

' string is reliable and less bothersome.

' add the sentences termination to the end of the sentence

al.Add(splitSentences(i).ToString().Trim() & c.ToString())

' Update the show of statistics

lblCharCount.Text = "Character Count: " & _GenerateCharacterCount(sTemp).ToString()

lblSentenceCount.Text = "Sentence Count: " & _GenerateSentenceCount(splitSentences).ToString()

lblWordCount.Text = "Word Count: " & _GenerateWordCount(al).ToString()

Return al

End Function

''' <summary>

''' Calls the ReasonableParser method and

''' displays the results

''' </summary>

''' <param name="sender"></param>

''' <param name="e"></param>

''' <remarks></remarks>

Private Sub btnParseReasonable_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnParseReasonable.Click

lstSentences.Items.Clear()

Dim al = ReasonableParser(txtParagraphs.Text)

Dim i As Integer

For i = 0 To al.Count - 1

lstSentences.Items.Add(al(i).ToString())

End Sub

#End Region

Next up is a region entitled, "Parse Withou Sentence Terminations"; this region contains a function entitled, "IDontCareHowItEndsParser" which accepts a string as an argument. This method tends to yield good results in terms of parsing sentences but does not add the termination to the parsed sentences; this is a good approach to use if you don't care what termination is used at the end of the sentence. The region also contains a button click event handler used to evoke the IDontCareHowItEndsParser function.

The code is annotated and reading through the notes will explain what is going on within the function.

#Region "Parse Without Sentence Terminations"

'/ <summary>

'/ If you don't care about retaining the sentence

'/ terminations, this approach works fine. This

'/ will return an array list containing all of the

'/ sentences contained in the input string but

'/ each sentence will be stripped of its termination.

'/ </summary>

'/ <param name="sTextToParse"></param>

'/ <returns></returns>

Private Function IDontCareHowItEndsParser(ByVal sTextToParse As String) As ArrayList

Dim sTemp As String = sTextToParse

sTemp = sTemp.Replace(Environment.NewLine, " ")

' split the string using sentence terminations

Dim arrSplitChars As Char() = {".", "?", "!"} ' things that end a

sentence

'do the split

Dim splitSentences As String() = sTemp.Split(arrSplitChars,StringSplitOptions.RemoveEmptyEntries)

Dim al As New ArrayList()

Dim i As Integer

For i = 0 To splitSentences.Length - 1

splitSentences(i) = splitSentences(i).ToString().Trim()

al.Add(splitSentences(i).ToString())

' show statistics

lblCharCount.Text = "Character Count: " +GenerateCharacterCount(sTemp).ToString()

lblSentenceCount.Text = "Sentence Count: " +GenerateSentenceCount(splitSentences).ToString()

lblWordCount.Text = "Word Count: " + GenerateWordCount(al).ToString()

Return al

End Function

''' <summary>

''' Calls the IDontCareHowItEndsParser and displays

''' </summary>

''' <param name="sender"></param>

''' <param name="e"></param>

''' <remarks></remarks>

Private Sub btnParseBest_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnParseBest.Click

lstSentences.Items.Clear()

Dim al = IDontCareHowItEndsParser(txtParagraphs.Text)

Dim i As Integer

For i = 0 To al.Count - 1

lstSentences.Items.Add(al(i).ToString())

End Sub

#End Region

The final region is entitled, "Generate Statistics". This region contains three functions which return the character count, word count, and sentence counts for a body of text. Again, this section is annotated; read through the annotation to get a description of how each function works.

#Region "Generate Statistics"

''' <summary>

''' Generate the total character count for

''' the entire body of text as converted to

''' one string

''' </summary>

''' <param name="allText"></param>

''' <returns></returns>

''' <remarks></remarks>

Public Function GenerateCharacterCount(ByVal allText As String) As Integer

Dim rtn As Integer = 0

' clean up the string by

' removing newlines and by trimming

' both ends

Dim sTemp As String = allText

sTemp = sTemp.Replace(Environment.NewLine, String.Empty)

sTemp = sTemp.Trim()

' split the string into sentences

' using a regular expression

Dim splitSentences As String() = _Regex.Split(sTemp, _"(?<=['""A-Za-z0-9][\.\!\?])\s+(?=[A-Z])")

' loop through the sentences to get character counts

Dim cnt As Integer

For cnt = 0 To splitSentences.Length - 1

' get the current sentence

Dim sSentence As String = splitSentences(cnt).ToString()

' trim it

sSentence = sSentence.Trim()

' convert it to a character array

Dim sentence As Char() = sSentence.ToCharArray()

' test each character and

' add it to the return value

' if it passes

Dim i As Integer

For i = 0 To sentence.Length - 1

' make sure it is a letter, number,

' punctuation or whitespace before

' adding it to the tally

If Char.IsLetterOrDigit(sentence(i)) Or _Char.IsPunctuation(sentence(i)) Or _Char.IsWhiteSpace(sentence(i)) Then

rtn += 1

End If

' return the final tally

Return rtn

End Function

''' <summary>

''' Generate a count of all words contained in the text

''' passed into to this function is looking for

''' an array list as an argument the array list contains

''' one entry for each sentence contained in the

''' text of interest.

''' </summary>

''' <param name="allSentences"></param>

''' <returns></returns>

''' <remarks></remarks>

Public Function GenerateWordCount(ByVal allSentences As ArrayList) As Integer

' declare a return value

Dim rtn As Integer = 0

' iterate through the entire list

' of sentences

Dim sSentence As String

For Each sSentence In allSentences

' define an empty space as the split

' character

Dim arrSplitChars As Char() = New Char() {" "}

' create a string array and populate

' it with a split on the current sentence

' use the string split option to remove

' empty entries so that empty sentences do not

' make it into the word count.

Dim arrWords As String() = sSentence.Split(arrSplitChars,

StringSplitOptions.RemoveEmptyEntries)

rtn += arrWords.Length

' return the final word count

Return rtn

End Function

''' <summary>

''' Return a count of all of the sentences contained in the

''' text examined this method is looking for a string

''' array containing all of the sentences it just

''' returns a count for the string array.

''' </summary>

''' <param name="allSentences"></param>

''' <returns></returns>

''' <remarks></remarks>

Public Function GenerateSentenceCount(ByVal allSentences As String()) As Integer

' create a return value

Dim rtn As Integer = 0

' set the return value to

' the length of the sentences array

rtn = allSentences.Length

' return the count

Return rtn

End Function

#End Region

Summary.

This article is intended to describe several approaches for parsing the sentences out of a body of text. Further, the article describes three functions which may be used to generate summary statistics on a body of text. There are of course other ways that may be used to do each of these things. In general, the best approach to parsing out the sentences appears to be through the use of a regular expression. Modifications to the regular expression may yield different results which might work better with the sort of text you are working with; however, I have found that this approach works well with even complicated bodies of text so long as the text is properly formatted into proper sentences.

Parsing Sentences and Building Text Statics in Visual Basic

Reactions

Comments