Connect c# with the hyper terminal ?

Essam Ali

I need to connect C# to hyper terminal to mange mobile from a serial port so i need to know how to make c# give the hyper terminal commands to do what i need "i need to access mobile sms and send and recive them from the pc while mobile is connected :)

6 Replies

Know the answer? Post it — somebody with the same question will find it here.

Essam Ali19y ago
ok
sry for it , it is correct i dont know why it do send
any way
try
[email protected]
axelsteppe19y ago
Hello, could you please check your mail adresse ? i get en error by [email protected]. regards Euro.
Essam Ali19y ago
thank u alot
u can send to
[email protected]
and i wish if you send me a small project of that to be sre that it work well

thankx alot
axelsteppe19y ago
Hello, you are right, i have forget something. You need one more file. Give me your PM and i will sent you the file. regards Euro.
Essam Ali19y ago
plz what is using LoMan.IO
i dont ge it
i use instade of it
using system.io.ports;

but i get that exception

Error 1 'System.IO.Ports.SerialStream' is inaccessible due to its protection level

how i solve
axelsteppe19y ago
Hello, the fallowing example work's by modem or direkt serial connection: using LoMan.IO static SerialStream ss = new SerialStream(); ss.Open("COM1"); // Set port settings ss.SetPortSettings("9600"); // Set timeout so read ends after 20ms of silence after a response ss.SetTimeouts(20, 0, 0, 0, 0); // Create the StreamWriter used to send commands StreamWriter sw = new StreamWriter(ss, System.Text.Encoding.ASCII); // Create the Thread used to read responses Thread responseReaderThread = new Thread(new ThreadStart(ReadResponseThread)); responseReaderThread.Start(); sw.Write("atdt 0815"); sw.Flush(); etc........... static void ReadResponseThread() { StreamReader sr = new StreamReader(ss, System.Text.Encoding.ASCII); try { for (;;) { // Read response from modem string response = sr.ReadLine(); Console.WriteLine("Response: " + response); } catch (ThreadAbortException) { } } With the sw.Write command you can send a string on the port you have selected on top. I have done a response thread that read the incoming data on the selected port. regards Euro.